1 866 609 0282 toll free

RGBWW LED Strip – High Density, 84 LEDs/m, 24V, 5 meters

$ (USD) 105.14

Currency Display

SKU: 815-fsi-rgb2xw Categories: ,

Description

RGBWW stands for red, green, blue, the primary colours of light, and two White LEDs (2400K and 6500K). This RGBWW strip emits every colour of the rainbow by combining different amounts of these RGB colours with the ability to add in tunable white light. Each LED actually contains 5 emitters, a red one, green one, blue one, and two white ones. Mixing white into the other colours allows for soft pastel tones, which is not possible with regular RGB strip.

Now you can put colourful bright light anywhere you want it! Lumicrest RGB Flexible Strip Lighting has a quality self-adhesive backing by 3M – just cut it to the length you want then peel and stick it to any smooth surface!

Most RGBWW LED Strip on the market comes with a density of 60 LEDs/m, which can create an inconsistent, dotted look. Lumicrest RGBWW LED Strip comes in an 84 LEDs/m package, which can be used in shallower channels for a smooth, virtually dot-free appearance.

Use an RGBWW Colour Controller (sold separately) to set the colour of your light, or use it to cycle through a range of colors by gentle fading or instant switching.

This LED strip comes with 420 bright “5050” LEDs in a standard 5 meter roll (16.4 feet) and can be cut to length, as marked on the strip in 6 LED increments.
The strip is 12mm wide, and fits into the following aluminum channels:

Surface-Mount:
Deep Aluminum Channel for LED Strip – Surface Mount (2.5m/8ft)
Aluminum Channel – Large Corner Mount (2.5m/8ft)

Recessed-Mount:
Deep Aluminum Channel – Recessed Mount (2.5m/8ft)
Deep Aluminum Channel – Spring Recessed Mount (2.5m/8ft)
Deep Aluminum Channel – Spring Recessed Mount (Large) (2.5m/8ft)

Requires a 24 volt DC power supply (sold separately)

All of our products come with a full 3 year warranty. If these lights are used 8 hours per day, 7 days per week, you should expect them to last a full 15 years.

Advantages of using 24 volt strip compared to 12 volt are:
– you can mount the power supply further away (without being concerned about voltage loss in the wires)
– the strip maintains consistent brightness over its whole length
– you can run sections longer than 5 meters with consistent brightness (as long as you choose a power supply with sufficient wattage)

Questions?
If you have question about installing LED strip, how to connect multiple reels, how many power supplies you need, or anything else, give us a call at 416 479 0132 or contact us via the website contact form. We’ll help you work it out!

* for indoor use only
* non-waterproof

RGBWW Controller Video

We recommend this controller with our RGB LED strip:

You may also like…