Description
This incredible in-line sensor turns almost any surface into a dimmable button! Works on wood, glass, marble, tile and any non-metallic surface.
Control:
Simply tap the surface on the other side of the installed area and the lights will turn on! Hold once to increase brightness. Tap and hold again to decrease brightness. Remembers the last dimmed state on the next power-on.
Installation:
First, stick the Invisible Touch Dimmer behind almost any surface, like under a desk, countertop, or above kitchen cabinets (works best on non-metallic materials 25mm or thinner). The switch can be completely hidden behind the material. Then plug the power supply (sold separately) into one side of the dimmer, and plug the other side of the dimmer into the barrel connector of the LED strip. Presto, dimmer installed!
Dimensions:
48.77 mm (1.92 in) x 48.77 mm (1.92 in) x 6.60 mm (0.26 in), 5.5 mm DC Barrel Input wire: 4.50 in, 2.1 mm DC Barrel Output wire: 8.50 in
Also included in the box is a sensor placement sticker and an instruction manual with specifications. Input and output wires are labelled.
LED strip and 24V DC Power Supply sold separately.
Questions?
If you have questions about installing LED strip, how to connect multiple reels, how many power supplies you need, or anything else, give us a call at 1-877-910-1011 or 416 479 0132 or contact us via the website contact form. We’ll help you work it out!
