Pro Series: 24V Dotless White High CRI (92+) LED Strip, 5m/16.4ft Reel (+ Optional Wireless Dimmer & Power Supply)

From: $62.79

Want ultra-smooth LED lighting without the unsightly look of “dots”? Our new Dot-Free High CRI flexible strip is just what you need.  The lighting effect is perfectly uniform, with or without  Aluminum Channel & Diffuser. We do recommend that you use aluminum channel with this product because the metal acts as a heat sink and will increase the longevity of your strip. 24V DC High CRI LED Strip Light 1040 LEDs per meter, comes  in 5 meter reels.

You’ll need a power supply, wireless dimmer/receiver, and aluminum profile with this product! The products below are recommended as the best suited to work together with this LED strip:

Want ultra-smooth lighting without the look of LED “dots”? Our new Dotless High CRI flexible strip is just what you need. When used in any Aluminum Channel with diffuser, or even without, the lighting effect is perfectly uniform. 24V DC version. Comes in 5 meter reels.

Low Profile Aluminum Channel - Surface Mount (2.5m/8ft)

17.5 mm (3/4 inch) wide x 7 mm (1/4 inch) high. This channel is low-profile, perfect for under cabinet lighting. SKU 450

Flexible Aluminum Channel - Surface Mount (2.5m/8ft)

17 mm (3/4 inch) wide x 5 mm (1/4 inch) high. This super-low-profile channel can be used on flat surfaces, or easily bent to conform to curves such as arches. SKU 1161

Aluminum Channel - Corner Mount (2.5m/8ft)

18 mm (11/16 inch) wide x 18 mm (11/16 inch) high. This channel allows the light to shine at a 45 degree angle. It can fit inside a corner or be used to illuminate shelving, niches or inside cabinets. SKU 1182

60 Watt MeanWell Plug-In Power Supply (OWA 60)

Will power 1 reel of this strip

90 watt MeanWell Plug-In Power Supply (OWA 90)

Will power 6.5m (21ft) of this strip

TLX 60 Watt Non-Dim 24V Hardwire Power Supply

Will power 1 reel of this strip

TLX 100 Watt Non-Dim 24V Hardwire Power Supply

Will power 7m (23ft) of this strip

Description

Want ultra-smooth lighting without the look of LED “dots”? Our new Dotless COB High CRI flexible strip is just what you need. When used in any Aluminum Channel with diffuser (or even without!) the lighting effect is perfectly uniform.

Lumicrest Pro Series  high CRI Flexible Strip Lighting has a quality 3M self-adhesive backing – just cut it to the length you want then peel and stick it to any smooth surface! Great for under cabinets, closets, task lighting, cove lighting and whatever else you can imagine.

Lumicrest High CRI Flexible Strip Lighting has been the choice of museums and art galleries due to how accurately it represents the colours of the objects it illuminates.

Clients who have compared our Lumicrest Pro Series High CRI Flexible Strip Lighting LED strips to those of our competitors choose Lumicrest because of the high brightness, uniformity and colour purity of our products. It comes with 5200 (!) bright LEDs in a standard 5 meter roll (16.4 feet) and can be cut to length in just 4.5 cm (1 and 3/4 inches) increments.

Requires a 24 volt DC power supply (sold separately). What size power supply do I need?

Our Pro Series – High CRI LED Strip Light is for those applications requiring an intense amount of light for task lighting or for general illumination of a room. Applications where you just want to highlight an area, but don’t need high intensity or high CRI light may select our medium output strip, which emits about 1/3 as much light.

Advantages of using 24 volt strip compared to 12 volt are:
– you can mount the power supply further away (without being concerned about voltage loss in the wires)
– the strip maintains consistent brightness over its whole length
– you can run sections longer than 5 meters with consistent brightness (as long as you choose a power supply with sufficient wattage)
– more choices for color: warm white, clean white and natural white

If you have a question about installing LED strip, how to connect multiple reels, how many power supplies you need, or anything else, give us a call at
1-877-910-1011 or 416 479 0132 or contact us via the website contact form. We’ll help you work it out!

* for indoor use only
* non-waterproof version (we can add a waterproof sleeve for an extra charge)
* we recommend 3000K clean white for kitchen under-cabinet applications
* we recommend 3500 or 4000K white for most display lighting applications
* we recommend choosing 2700K warm white for intimate, cozy environments

CRI (Color Rendering Index) is 92 or greater. Actual measured CRI is up to 95.
Width: 8 mm (5/16 inch) wide

Additional information

Low Profile Aluminum Channel - Surface Mount (2.5m/8ft)

Finish colour

Silver anodized, Black, White

Specifications & Photometry

Lumens: 1300-1500 Lumens per meter for 2700K, 3000K, 4000K & 6000K
CRI: 90+ (95 typical) (What is CRI?)
Total Length: 5 meter reel (16.4 feet)
Width: 8 mm for 2700K, 3000K, 4000K & 6000K.
10mm wide for 2200K and 3500K
Cuttable every: 45 mm/1 and 3/4 inch
Waterproof: No
Operating Voltage: 24 volts DC
Power consumption (watts) : 14 watts/meter (~70 watts/reel) for 2700K, 3000K, 4000K & 6000K
18 watts/meter for 2200K & 3500K

Specification Sheet

Spectral Reports (pdf):
2200K
2700K
3000K
3500K
4000K
6000K

Q & A

Ask a question
Can I cut dotless led wire to length? What connectors are needed? Mike swain asked on 02/12/2022

Yes you can cut it at the copper cut points. For connecting, we recommend soldering wires to the contacts, as clips tend to be unreliable over time.

David Geldart answered on 02/16/2022 store manager
(0) (0)
Add an answer