Description
Light anywhere from outdoor decks to indoor saunas:
Lumicrest EtherGlow IP67 Waterproof RGB LED flexible strip lighting has 840 LEDs/meter, producing a beautiful, dotless 480Lumens/meter. COB LEDs are installed inside a rugged flexible silicone housing, making the strip waterproof and dotless. EtherGlow is the product we most recommend for excellent and rugged performance in saunas and similar wet environments due to its water resistance and high heat tolerance.
Top Lumicrest quality:
Lumicrest EtherGlow RGB offers the same high quality of all our top-tier products.
It comes with 840 LEDs per meter (256 per ft), producing 480 lumens per meter (146 per ft).
Advantages of using a 24-volt strip compared to 12 volt are:
– you can mount the power supply further away (without being concerned about voltage loss in the wires)
– the strip maintains consistent brightness over its whole length
– you can run sections longer than 5 meters/16ft with consistent brightness (as long as you choose a power supply with sufficient wattage)
Control:
Change the colours and brightness using a Miboxer controller and remote control: handheld or wall-mounted (sold separately, see recommended below).
Installation:
Lumicrest EtherGlow is the choice of saunas for a reason: It includes an IP67 fully waterproof housing with endcaps, and it has a high operating temperature!
No need to be constrained by light fixtures, now you can put bright light anywhere you want it! Lumicrest EtherGlow Flexible Strip Lighting has a quality 3M self-adhesive backing – just cut it to the length you want then peel and stick it to any smooth surface! Great for under cabinets, closets, task lighting, cove lighting and whatever else you can imagine.
Available in rolls, it can be cut to length every 50 mm (1.96 in) as marked on the rear of the strip (black line).
NOTE: When cut, install the endcap with 100% silicone for a waterproof seal.
This product requires a 24-volt power supply. Each meter of stip consumes only 5 (20 m) or 7 (5 and 10 m) watts of 24V DC power. See recommended drivers below or explore this handy guide: What size power supply do I need? View all drivers: LED Power Supplies.
For outdoor or wet locations, we also recommend installing this light and power supply using waterproof wiring and connections.
Dimensions: 10 mm wide ( 0.39 in) x 20 m long (65.6 ft), can be cut every 50 cm.
Recommended components sold separately:
– To control the light and change the colours, you will need a wireless receiver and remote control. See our MiBoxer Single-Color and Dual-CCT Controller/Receiver. See all remote contorllers here: MiBoxer Wireless Color Controls.
– This product requires a 12-volt power supply. Choose one in the bundle options or view all: LED Power Supplies.
– We recommend our waterproof wiring for outdoor or wet locations.
– Explore other lights linkable with the Bi-Boxer system: RGBWW Indoor-Outdoor Colour Changing 25° Spotlight, RGBWW Indoor-Outdoor Colour Changing 160° Floodlight, Indoor/Outdoor Recessed Spotlights: RGB or Dual White, RGB LED Strip Super High Resolution, or view all: MiBoxer Wireless Colour Control and Dimming System.
24V DC Waterproof LED Lighting 5, 10, 20 m roll.
Questions?
If you have questions about installing LED strip, how to connect multiple reels, how many power supplies you need, or anything else, give us a call at 1-877-910-1011 or 416 479 0132 or contact us via the website contact form. We’ll help you work it out!
