Name: Track, H-Type
SKU: track
Availability: InStock

Description

Quality track for the right lights:
Illuminate your gallery, restaurant, store or home with our museum-quality lighting track system. Standard with the 3-conductor Halo system (H-type), it is compatible with every track light we offer. All track heads and extenders can be mounted at any point along the track. Attach the lighting track directly to the ceiling with the included mounting screws, or suspend it if your ceiling is very high.

Compatible with all our best lights:
Standard with the 3-conductor Halo system (H-type), it is compatible with every track light we offer, including our high CRI integrated track heads like Apturi III, Modulux (+ more), and also standard track heads (all sold separately).
All track heads and extenders can be mounted at any point along the track with a simple twist to secure them in place.

Dimensions & installation:
Attach the lighting track directly to the ceiling with the included mounting screws, or suspend it if your ceiling is very high.
The track may be surface, stem, or cable mounted. Surface mounting hardware and dead-end caps are included with each track section
Install using a variety of connectors (sold separately) to feed power to the track, or to connect multiple tracks in a straight line or other configurations using L connectors, T connectors and more. See options listed below and at the bottom of this page in the “Works Together With” section, or view all track products here: Track Connectors
If you only require a single 8-foot length, we recommend buying 2 pieces of 4-foot track with an inline connector.

1219.2 mm (4 ft) & 2438.4 mm (8 ft) length segments (both cuttable), (1225.55 mm (48.25 in) & 2444.75 mm (96.25 in) actual length, including end caps)
36.0 mm (1.42 in) width
17.5 mm (0.69in) height

The 0.030 die cast aluminum track can easily be cut shorter using a hacksaw. Follow the enclosed directions for cutting.

Voltage: 120V 60Hz / 10A Max.
Maximum Wattage: 1100 watts

cULus Listed for indoor, dry location

Recommended products:
A variety of connectors (sold separately) are available to feed power to the track, or to connect multiple tracks in a straight line or other configurations using L connectors, T connectors and more.
See options listed below and at the bottom of this page in the “Works Together With” section, or view all track products here: Track Connectors

Live End Feed
Powers track system from the end of a run. Bottom knockout allows direct feed with an electrical connector.
Floating Canopy Feed
Mounts to a 4″ or 3″ octagon outlet box. Canopy can be placed anywhere along the track to supply power.
Live End Conduit Connector
End feed, which accepts a 0.5 in trade-size conduit fitting through the end knockout. Left polarity can also be used to jump power to another run.
Straight Inline Connector (Seamless)
Used to connect two pieces of track together and pass the electricity to create a longer run. Cannot be used as a power feed.
“L” Connector
Used to connect two pieces of track together at a right angle and carry the electricity. Can be used as a power feed with one knockout. Can be adjusted to accommodate left and right polarity.
“T” Connector
Used to connect two pieces of track together in a “T” shape and carry the electricity. It can be used as a power feed with one knockout.
“X” Connector
Used to connect four pieces of track together in an “X” shape and carry the electricity. Can be used as a power feed with one knockout.
Flexible Connector
Used to connect two pieces of track together and carry the electricity for any angle between 0º and 90º, and is flexible horizontally or vertically. Can be used as a power feed with two knockouts.
Extender for Track Heads
Extend your track heads down from our Halo-compatible track. One end of this Extender twists into the track, and the track head twists into the other end. You can even connect one extender to another to create an extra-long extender. Great for optimizing the light beam spread and shape when ceilings are too high, or for avoiding ductwork and other obstructions.
Knuckle/Slope Adapter for Track heads
This adapter is designed to be connected between a track (or monopoint or an extension arm) and a track head. It provides an extended range of positioning for the track head, which is very useful for certain applications. For example, if you mount your track on a sloped ceiling, this adapter lets you point the track head exactly where you need it.
Flexible Connector
Down posts are used to hang track fixtures from high ceilings. Pair with a Wire Way Cover for a seamless installation.
Wire Way Cover
Wire way covers are used to hide wire-runs from downposts to live-end connectors.

Instructional Videos:

Questions?

If you have questions about installing LED strip, how to connect multiple reels, how many power supplies you need, or anything else, give us a call at 1-877-910-1011 or 416 479 0132 or contact us via the website contact form. We’ll help you work it out!