Description
Want to install an LED linear light bar or LED flexible strip but don’t want to run additional wiring from an existing ceiling outlet? This 40 Watt AC Dimmable Power Supply (puck) is just what you need. Its diminutive size (30 mm high x 79 mm wide) means it’s small enough to fit into an octagon junction box.
It can be dimmed using most common 120 volt dimmer switches such as Lutron and Leviton. That’s why we call it “AC dimmable”. Simply connect the output of the dimmer to the input of the power supply, and connect your LED flexible strip to the 24 volt output. It’s engineered with a filtering circuit to eliminates flickering or strobing and ensure smooth seamless operation.
It’s compatible with both MLV and ELV dimmers, but can make some audible sound when using MLV type dimmers. Mount in a remote location or use an ELV dimmer if necessary.
NOTE: This driver requires a 60-70 percent minimum load (about 25 watts) in order to dim properly. In other words, 1/2 reel of Spectrala Standard (9 watt/m) LED strip or 1/2 reel of Builderz LED strip is required, or one full reel of Spectrala Accent LED strip (4.5 watts/m)
If you need to dim lower loads (short length or low power LED strips) please select this model: https://lumicrest.com/product/60-watt-dimmable-24v-hardwire-power-supply-1550/ which does not have a minimum load requirement. It also makes no audible sound. However, it cannot fit into an octagon junction box.
These power supplies require a hard wired connection to your dimmer switch. Works with most commonly available dimmer switches and meets all safety regulations for use with LED flexible strip.
This power supply is cETLus electrical safety approved.
24 volt DC output.
Class 2 (current limited)
Height: 30 mm
Diameter: 79 mm
