EasyLinx Power Input (No Switch)

$4.79

In stock

SKU: 341-el-pfeed Categories: , ,

Description

This connector cable allows you to feed power into Easylinx bars. The barrel-connector end connects to a Lumicrest 24V power supply and provides power through the 2 output pins. The 2-pin end is inserted into the first in a series of connected light bars.

Q & A

Ask a question
EasyLinx Power Input (No Switch) EasyLinx Power Input (No Switch)
Your question
* Question is required
Name
* Name is required
How would I connect lights directly into low voltage wiring from remotely located transformer? Paddy Daly asked on 09/06/2021

These Easylinx input power connector wires plug into the Easylinx on one end, and to your low voltage wire on the other end using a DC barrel connector. BUT, if you have "bare" wires without connector, then get a DC male barrel connector (https://lumicrest.com/product/barrel-terminal-for-led-strip-male/) and put it on the wire so it can mate with the Easylinx input power connector. Make sure you're feeding 24 volts DC into the low voltage wire!

 David Geldart answered on 09/09/2021 store manager
(0) (0)
Add an answer
Your answer
* Answer is required
Name
* Name is required