RGBWW LED Strip – High Density, 96 LEDs/m, 5m/16.4 Reel (+ Optional Controller and Power Supply)

From: $22.79

This strip combines color-changing RGB with warm white and cool white to give you a product that is suitable for a multitude of projects. At 96 LEDs per meter, its high density relative to other RGBWW strips on the market means it can be placed in shallower channel than would otherwise be possible.

You’ll need a remote, a receiver, a power supply, and aluminum profile with this product! The products below are recommended as the best suited to work together with this LED strip:

RGBWW 6-Zone Wireless Remote Controller (FUT089S)

Each zone can be paired to multiple receivers. SKU 1287

RGBWW Colour Controller/Receiver with WiFi and Smart Speaker Control

SKU 1331

RGBWW 1-Zone Wireless Remote Controller

Can be paired to multiple receivers. SKU 751

RGBWW 4-Zone Wireless Remote Controller (Wall Mount)

Each zone can be paired to multiple receivers. SKU 887

RGBWW 1-Zone Wireless Remote Controller (Wall Mount)

Can be paired to multiple receivers. SKU 886

90 watt MeanWell Plug-In Power Supply (OWA 90)

Powers 1.5 reels of this strip. SKU 423

60 Watt MeanWell Plug-In Power Supply (OWA 60)

Powers up to 1 reel of this strip. SKU 451

TLX 100 Watt Non-Dim 24V Hardwire Power Supply

Powers up to 1.5 reels of this strip. SKU 839

TLX 60 Watt Non-Dim 24V Hardwire Power Supply

Powers up to 1 reel of strip. SKU 838

SKU: RGB COB + Receiver/Controller and Power Supply Bundle-1 Categories: , , ,

Description

RGBWW stands for red, green, blue, the primary colours of light. This LED strip has RGB LEDs and two White LEDs (2400K and 6500K). This RGBWW strip emits every colour of the rainbow by combining different amounts of these RGB colours with the ability to add in tuneable white light. Each LED actually contains 5 emitters, a red one, green one, blue one, and two white ones. Mixing white into the other colours allows for soft pastel tones, which is not possible with regular RGB strip.

Now you can put colourful bright light anywhere you want it! Lumicrest RGB Flexible Strip Lighting has a quality self-adhesive backing by 3M – just cut it to the length you want then peel and stick it to any smooth surface!

Most RGBWW LED Strip on the market comes with a density of 60 LEDs/m, which can create an inconsistent, dotted look. Lumicrest RGBWW LED Strip comes in an 96 LEDs/m package, which can be used in shallower channels for a smooth, virtually dot-free appearance.

Use an RGBWW Colour Controller (sold separately) to set the colour of your light, or use it to cycle through a range of colors by gentle fading or instant switching.

This LED strip comes with 480 bright “5050” LEDs in a standard 5 meter roll (16.4 feet) and can be cut to length, as marked on the strip in 6 LED increments.
The strip is 12mm wide, and fits into the following aluminum channels:

Surface-Mount:
• Deep Aluminum Channel for LED Strip – Surface Mount (2.5m/8ft)
• Aluminum Channel – Large Corner Mount (2.5m/8ft)

Recessed-Mount:
• Deep Aluminum Channel – Recessed Mount (2.5m/8ft)
• Deep Aluminum Channel – Spring Recessed Mount (2.5m/8ft)
• Deep Aluminum Channel – Spring Recessed Mount (Large) (2.5m/8ft)

Requires a 24 volt DC power supply (sold separately)

Advantages of using 24 volt strip compared to 12 volt are:
– you can mount the power supply further away (without being concerned about voltage loss in the wires)
– the strip maintains consistent brightness over its whole length
– you can run sections longer than 5 meters with consistent brightness (as long as you choose a power supply with sufficient wattage)

Questions?
If you have question about installing LED strip, how to connect multiple reels, how many power supplies you need, or anything else, give us a call at 416 479 0132 or contact us via the website contact form. We’ll help you work it out!

* for indoor use only
* non-waterproof

RGBWW Controller Video

We recommend this controller with our RGB LED strip:

Q & A

Ask a question
There are no questions yet