FilmPro (CRI 95+) Hybrid Tungsten-Daylight LED Flexible Strip (+ Options)

Our FilmPro Very High CRI Hybrid LED strip alternates tungsten and daylight LEDs to permit mixing controlled amounts of each colour temperature to create intermediate colour temperatures.

You’ll need a power supply, controller/receiver, remote and aluminum profile with this product. The products below are recommended as the best suited to work together with this LED strip:

FilmPro (CRI 95+) Hybrid Tungsten-Daylight LED Flexible Strip

Temporarily unavailable

Versatile "Chameleon" Aluminum Channel - Surface Mount (2.5m/8ft)

16 mm (5/8 inch) wide x 16 mm (5/8 inch) high. This channel can surface mounted with invisible rear-mounted clips, for a perfectly seamless appearance. Or it can be suspended with aircraft cables to become and elegant linear pendant light.

Aluminum Channel - Corner Mount (2.5/8ft)

18 mm (11/16 inch) wide x 18 mm (11/16 inch) high. This channel allows the light to shine at a 45 degree angle. It can fit inside a corner or be used to illuminate shelving, niches or inside cabinets. SKU 532

Aluminum Channel - Corner Mount (2.5/8ft)

Small Rounded Corner Mount (2.5m/8ft) 16 mm (5/8inch) tall x 16 mm (5/8 inch) wide - SKU1169

TLX 60 Watt Non-Dim 24V Hardwire Power Supply

Can power up to 0.75 of a reel if used in colour blend mode, which is the most common usage and the mode that comes with the controllers we provide. If used with a system that allows for full brightness of both the 2700K and 6000K, then this power supply will power 0.33 of a reel.

TLX 100 Watt Non-Dim 24V Hardwire Power Supply

Can power up to 1.25 of a reel if used in colour blend mode, which is the most common usage and the mode that comes with the controllers we provide. If used with a system that allows for full brightness of both the 2700K and 6000K, then this power supply will power 0.6 of a reel.

MiBoxer Single-Color and Dual-CCT Receiver/Dimmer

SKU 1330

1-Zone Round Touch Wireless Dimmer Control for Dual Colour LED Strip

SKU 1333

This product is currently unavailable.

Description

Our FilmPro Very High CRI Hybrid LED strip alternates tungsten and daylight LEDs to permit mixing controlled amounts of each colour temperature to create intermediate colour temperatures.

Both the 2700K and the 6000K LEDs emit full spectrum white LED linear light source that renders skin-tones and colors beautifully and naturally. Designed to deliver truly color-correct full-spectrum white light. Rated up to 98 CRI with R9 red value over 90, they have been engineered to blend seamlessly with legacy daylight and fluorescent fixtures and other high-end LED fixtures. They can be dimmed without changing Kelvin color temperature using our flicker-free DMX dimmers.

With 196 LEDs per meter (98 tungsten and 98 daylight), FilmPro LED strip provides seamless, dot-free illumination on camera. They can be cut every 7 cm (2 and 3/4 inches).

Ideal for set design, incident lighting, light boxes, under cabinet lighting, vehicle interiors, inside a refrigerator, interactive lighting from electronic devices and so much more. With its very low profile, low power consumption and no heat in the light beam, FilmPro Hybrid LED strip can be used virtually anywhere.

Digital cinema cameras are more sensitive than ever to the spectral quality of white light. That’s why precise control of beautiful, full spectrum white light is key. FilmPro Hybrid LED brings you smooth, full-spectrum color-correct light for lighting and set-design professionals.

Comes with bare-wire ends.

24 volt DC
5 meters (16.4 feet)
10 mm wide
CRI 95+
Cuttable every 7 cm (2 and 3/4 inches)
Consumes 33.6 watts per meter (aw tungsten + 16.3w daylight)
Secure Tesa tape backing
Emits 3,600 lumens per meter: 2,160 lumens per meter at 6000K, 1,440 lumens per meter at 2700K

 

Additional information

Versatile "Chameleon" Aluminum Channel - Surface Mount (2.5m/8ft)

Finish colour

Silver anodized, Black, White

1-Zone Round Touch Wireless Dimmer Control for Dual Colour LED Strip

Colour

Black, White

Specifications & Photometry

Lumens:
– Accent line (4.5w/m): 337 lm/m (2200K) – 580 lm/m (6000K)
– Standard line (9w/m): 675 lm/m (2200K) – 1161 lm/m (6000K)
– High Output line (18w/m): 1215 lm/m (2200K) – 2088 lm/m (6000K)

CRI: 95+ (What is CRI?)
Total Length: 5 meters (16.4 feet)
Width:
– 8 mm for Accent and Standard lines
– 10 mm for High Output line
Cuttable every:
– 50 mm (~2 inch) for Accent and Standard lines
– 62 mm (2.45 inch) for High Output line
Waterproof: No
Operating Voltage: 24 volts DC
Power consumption (watts) :
– Accent: 4.5 watts/m (1.4 watts/ft)
– Standard: 9 watts/m (2.8 watts/ft)
– High Output: 18 watts/m (5.5 watts/ft)

Specification Sheet for Accent line (4.5 w/m)
Specification Sheet for Standard line (9 w/m)
Specification Sheet for High Output line (18w/m)

Spectral Reports (pdf):
3000K
3500K
4000K

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: